Subscribe
Call Us: 905-669-8893


Auctions

Surplus to the Ongoing Operations - Cascades Tissue Group - Pittston, PA
Thursday June 3, 2021
Date & Time
Closing: Thu. 06/03/2021 11:00 am
Currency
USD
Sale Location
901 Sathers Dr, Pittston, PA 18640, United States
Sale Type
Online Only
Inspection Date
By Appointment Only
Buyers Premium
18%
Industry
Tissue Converting
CLICK BELOW FOR ONLINE BIDDING
Bidspotter
Featuring

TISSUE CONVERTING EQUIPMENT

PA Bath B1

  • PCMC Backstands, 83”/68”
  • Perforated Roll, 85.5”W, 28.6” Circumference, 4,091” Perf. Length Min, 4.25” Perf. Length Max, (7) Rows of Perf., (11) Sheet Multiples, Slippage
  • 1963 PCMC Embosser, s/n M826, Steel-to-Steel, Matched, 85” Max Width, Flower US Pattern, Flower/Stitch
  • KARNEL MRD2 Tail Sealer, Fixed Gun, 15 Logs/min Max Cycle Speed, 83” Max Width
  • ROLCO Accumulator, (215) Buckets, 83” Max Log Width, (2) Lane Discharge
  • 1963 PCMC 100 Series Log Saw, s/n R-448-03, Gears, 4.25” Cut Length/Slitter Position, (150) Max Cuts/min Per Lane, 94” Max Width of Logs, (1) Air Cut, Rotary Grinding, Trimex Type Shuttle Upgrade, Trim Removal Blower to Bailer, 1” Min Trim, (1) Blade, (2) Infeed Lanes, (2) Outfeed Lanes, CompactLogix Electronic Platform
  • 1998 LANGEHAMMER F81-S130-2-5/300 Diverter, 2:3 Configuration, Controlled by Saw
  • 1994 HAYSSEN UF130EPS Right Hand Wrapper, s/n 84496, (4) Infeed Lanes, (2) Layer, Poly Wrapping Material, 12-24 Format, 20” Max Pack Width, 12” Max Pack Height, 25” Max Pack Length, 60” Shear Width, 130 Max Cycle Speed, 480VAC, BAM Electronic Platform
  • HAYSSEN 5700 Right Hand Wrapper, s/n 13941, (2) Infeed Lanes, (2) Layer, Wrapping Material: Poly, 45PPM Max Cycle Speed, 480VAC, ABSLC504 & Relay Electronic Platform
  • 1975 SALWASSER M43, R405 Case Packer, s/n 751296, (2) to (5) Infeed Lanes, Manual Magazine Feeder, (50) Cases in Magazine, 18” Max Case Width, 22.5” Max Case Height, 28” Max Case Length, 4 Case/min Max Cycle Speed, 480VAC, AB-PLC5 Electronic Platform
  • LOVESHAW 16B Case Sealer, Tape – External
  • 1991 MATTHEWS WR4 Palletizer, s/n P92-68420/P94-00766, 25-30 Load/hr, Layer Forming, AB PLC5 Electronic Platform
  • 1991 LANTECH SVAST Stretch Wrapper, s/n P92-68420/P94-00766, 20” Film Width, 30 Load/hr, Complete w/ Pallet Conveyors & Turntable, AB SLC/505 Electronic Platform
  • HARRINGTON Overhead Crane System, 85’L x 3-Ton Cap., Chain Hoist, Pendant Control

 

PA Bath B4

  • BRETTING Backstands, s/n 4548-91, 83”/72” Width, (2) Backstands
  • Perforated Roll, 85.5”W, 28.6” Circumference, 4,091” Perf. Length Min, 4.091” Perf. Length Max, (7) Rows of Perf., (11) Sheet Multiples, Slippage
  • 1963 PCMC Embosser, s/n M826, Steel-to-Steel, Matched, 85” Max Width, Flower US Pattern, Flower/Stitch
  • KARNEL MRD2 Tail Sealer, Fixed Gun, 15 Logs/min Max Cycle Speed, 83” Max Width
  • ROLCO Accumulator, s/n 6586, (315) Buckets, 83” Max Log Width, (2) Lane Discharge
  • 1977 PCMC 150 Series Log Saw, s/n 5922, Gears, 4.25” Cut Length/Slitter Position, (150) Max Cuts/min Per Lane, 94” Max Width of Logs, (1) Air Cut, Rotary Grinding, Trimex Type Shuttle Upgrade, Trim Removal Blower to Bailer, 1” Min Trim, (1) Blade, (2) Infeed Lanes, (2) Outfeed Lanes, CompactLogix Electronic Platform
  • 1999 LANGEHAMMER F81-M130-2-5/300 Diverter, 2:3 Configuration, Controlled by Saw
  • 1984 HAYSSEN UF160 Right Hand Wrapper, s/n 16417, (3) Infeed Lanes, Poly Wrapping Material, 4 – 6 (176sh) Format, 16.5” Max Pack Width, 6.0” Max Pack Height, 13.5” Max Pack Length, 45” Shear Width, 130 Max Cycle Speed, 480VAC, TI530T Electronic Platform
  • VALLEY TISSUE Single Roll Wrapper, (2) Infeed Lanes, (1) Layer, Wrapping Material Paper, 140PPM Max Cycle Speed, 480VAC, ABSLC504 Electronic Platform, Updated in 2010 w/ PLC SLC 504
  • 1992 SALWASSER L44, R402 Case Packer, s/n 9208155, (2) to (5) Infeed Lanes, Manual Magazine Feeder, (300) Cases In Magazine, 20” Max Case Width, 19” Max Case Height, 30” Max Case Length, 4 Case/min Max Cycle Speed, 480VAC, AB-PLC5 Electronic Platform
  • LOVESHAW 16B Case Sealer, Tape – External
  • HARRINGTON Overhead Crane System, 85’L x 3-Ton Cap., Chain Hoist, Pendant Control

 

PA Towel T1

  • PCMC Backstands, 69”/72” Width, (2) Backstands
  • Perforated Roll, 72”W, 33.75” Perf. Roll Circumference, 5.625” – 11.25” Perf. Length Min, 3/6 Number of Rows of Perf., (1) Sheet Multiples
  • PCMC Printer, s/n 7257, 9.350” Max Diameter, 70” Max Width, (2) Colours, 30.159” Repeat, Upgraded to Doctor Boxes
  • 1990 PCMC Embosser, s/n 7257, Rubber-to-Steel, Nested Style, Diamond Pattern, 1.25” Flat Usual Nip Width, Laminator, N-2496
  • PCMC Spraymation Tail Sealer, Spray Type, 22 Logs/min, 68” Max Width
  • PCMC R904 Accumulator, s/n 7257, (296) Buckets, 68” Max Log Width, (2) Lane Discharge
  • 1990 PCMC LS-520 Log Saw, s/n R-904, Servos, 11” Cut Length/Slitter Position, 85 Max Cuts/min Per Lane, 77” Max Width of Logs, Rotary Grinding, Trimex Type Shuttle Upgrade, Trim Removal Blower to Bailer, 1” Min Trim, (1) Blade, (2) Infeed Lanes, (3) Outfeed Lanes, ControLogix Electronic Platform
  • PACKAIR Diverter, 2:4 Configuration, AB SLC/504 Electronic Platform
  • 1991 SALWASSER L44, R405 Case Packer, s/n 91012869, (1) to (5) Infeed Lanes, Manual Magazine Feeder, (500) Cases in Magazine, 20.5” Max Case Width, 23” Max Case Height, 30.5” Max Case Length, 5.5 Case/min Max Cycle Speed, 480VAC, TI530T Electronic Platform
  • HARRINGTON Overhead Crane System, 95’L x 3-Ton Cap., Chain Hoist, Pendant Control

 

PA Towel T2

  • PCMC Backstands, 69”/72” Width, (2) Backstands
  • Perforated Roll, 72”W, 33.75” Perf. Roll Circumference, 5.625” – 9” – 11.25” Perf. Length Min, 3/6 Number of Rows of Perf., 4/8 Sheet Multiples, Slippage
  • PCMC Printer, s/n M-426, 9.350” Max Diameter, 70” Max Width, (2) Colours, 30.159” Repeat
  • PCMC Embosser, s/n M426, Rubber-to-Steel, Nested Style, Diamond Pattern, 1.25” Flat Usual Nip Width, Laminator, N-2496
  • KARNEL MRD2 Tail Sealer, s/n 295167, Fixed Gun, 15 Logs/min Max Cycle Speed, 68” Max Width
  • ROLCO Accumulator, s/n 6606, (257) Buckets, 68” Max Log Width, (2) Lane Discharge
  • 1975 PCMC 150 Series Log Saw, s/n R702, Gears, 11” Cut Length/Slitter Position, 75 Max Cuts/Min Per Lane, 77” Max Width of Logs, Rotary Grinding, Trimex Type Vacuum, Blower to Bailer, 1” Min Trim, (1) Blade, (2) Infeed Lanes, (2) Outfeed Lanes, MicroLogix Electronic Platform
  • Diverter, 2:2 Configuration, AB SLC/504 Electronic Platform
  • HAYSSEN UF160 Left Hand Wrapper, 1 – 3 Infeed Lanes, (1) Layer, Poly Wrapping Material, 16.5” Max Pack Width, 6.0” Max Pack Height, 13.5” Max Pack Length, 45” Shear Width, 160 Max Cycle Speed, 480VAC, Control Logix Electronic Platform ($125k Control Upgrade in 2004)
  • 1975 SALWASSER M43, R405 Case Packer, s/n 751295, (4) or (5) Infeed Lanes, Manual Magazine Feeder, (50) Cases in Magazine, 18” Max Case Width, 22.5” Max Case Height, 28” Max Case Length, 3 Case/min Max Cycle Speed, 480VAC, AB SLC/504
  • HARRINGTON Overhead Crane System, 95’L x 3-Ton Cap., Chain Hoist, Pendant Control

 

PA Towel T3

  • BRETTING Backstands, s/n 4547-91, 69”/72” Width, (2) Backstands
  • Perforated Roll, 94.5”W, 45” Perf. Roll Circumference, 5.625” – 9” – 11.25” Perf. Length Min, 4/5/8 Number of Rows of Perf., 4/5/8 Sheet Multiples, Slippage
  • PCMC Printer, s/n M-322, 9.350” Max Diameter, 90” Max Width, (2) Colours, 30.159” Repeat
  • PCMC Embosser, s/n M541-05, Rubber-to-Steel, Nested Style, 68” Max Width, Diamond Pattern, 1.25” Flat Usual Nip Width, Laminator, N-2496
  • KARNEL MRD2 Tail Sealer, Fixed Gun, 17 Logs/min Max Cycle Speed, 68” Max Width
  • PCMC Accumulator, s/n R90253, (246) Buckets, 68” Max Log Width, (2) Lane Discharge
  • 1975 PCMC 150 Series Log Saw, s/n R01212, Gears, 11” Cut Length/Slitter Position, 75 Max Cuts/min Per Lane, 99” Max Width of Logs, (2) Air Cuts, Rotary Grinding, Trimex Type Trim Picker, Trim Removal Blower to Bailer, 1” Min Trim, (1) Blade, (2) Infeed Lanes, (2) Outfeed Lanes, AB SLC/504 Electronic Platform
  • Diverter, 2:2 Configuration, AB SLC/504 Electronic Platform
  • 2003 SALWASSER CL405, CP430 Case Packer, s/n 200305AQ3548, (1) to (5) Infeed Lanes, Manual Magazine Feeder, (500) Cases in Magazine, 24” Max Case Width, 23” Max Case Height, 30” Max Case Length, 12 Case/min Max Cycle Speed, 480VAC, AB SLC/504 Electronic Platform, All Servo Motors
  • HARRINGTON Overhead Crane System, 95’L x 3-Ton Cap., Chain Hoist, Pendant Control

 

PA Napkin N1

  • 2009 PACK AIR GRIPPER Box Elevator, s/n 7193, 12’ Lift

 

PA Napkin N2

  • (2) 1999 BRETTING 4 Colours Graphic Print Deck Flexo Printer, 48” Max Width, Closed Cavity Doctor Boxes, Ceramic Anilox Rolls ($12mil Install cost in 1999)
  • COFFING Free Standing Crane System, 43’L x 40’W x 18’H, 2-Ton Cap., (2) Chain Hoists, Pendant Control
  • COFFING Overhead Crane System, 110’ x 2-Ton Cap., Chain Hoist, Pendant Control
  • 2005 AMBAFLEX SV-400-1800 Spiral Conveyor, s/n 23.398/05, 14’ Lift, Box Inlet 28”, Box Out 14’, Total Height 15’, Inlet vs. Outlet 180 Degrees

 

PA Napkin N3

  • BRETTING (4) x 24”W Backstands
  • Perforated Roll, (2) Sheet Multiples
  • BRETTING Printer, 24” Max Width, (2) Colours, Upgraded w/ Doctor Boxes
  • LOVESHAW 16B Case Sealer, Tape – External
  • HARRINGTON Overhead Crane System, 15’ Rail x 1-Ton Cap., Chain Hoist, Pendant Control

 

PA Napkin N4

  • 2009 PACK AIR GRIPPER Box Elevator, s/n 7193, 12’ Lift

 

PA Facial F1 COMPLETE LINE

  • 1999 BRETTING 5452-987F Folder, s/n 5452-98D, Product Made: Facial, Product Type: Flat/Pop Up, (7) Chutes, 63.8” Max Width, 55.6” Usual Width, 425 – 500 ft/min Max Speed, 9 Logs/min Max Speed, Servos, Contrologix Electronic Platform
  • BRETTING (4) x 64” Backstands, 60” Max Width, (4) Backstands, Can Run 65” Roll to Index (7) Clips
  • Perforated Roll, 8” Perf. Length Min, (2) Sheet Multiples
  • Calender Rolls, Smooth Pattern
  • 1998 JONES-CARTONNER Cartonner, Infinity w/ Folder, s/n S-5548, Format: Reg/Big/Cube, AB/SLC504 Electronic Platform, 2018 Upgrade to Control Logix, Can Make Flat Boxes or Pop Up Cartons
  • 1997 SALWASSER R-101 Case Packer, s/n 98033347, (1) Infeed Lane, Manual Magazine Feeder, (300) Cases in Magazine, 4 Cases/min Max Cycle Speed, AB/ SLC/504 Electronic Platform
  • LOVESHAW 16B Case Sealer, Tape – External
  • COFFING Free Standing Crane System, 125’L x 40’W x 18’H, 2-Ton Cap., (2) Chain Hoists, Pendant Control (2x runaway beams)

 

MISC. TISSUE CONVERTING EQUIPMENT

KUO’S GANG KG-223 Fully Automatic Inter-Fold Facial Tissue Converting Machine w/ Automatic Transfer Unit, 6-Lanes, Sheet Size: 210mm x 190mm, Folded Size: 105mm x 190mm, Folded Type: Interfold (V-Fold), Speed: 115m/min Max, Parent Rolld Width: 1,500mm, Parent Roll Diameter: 1,800mm, Inside Core Diameter: 8”/10” (Located in Kingsey Falls, QC)

2007 PCMC PROLOG LT *4*-Lane Saw w/ Shuttle Trim Eliminator, Model PCMC JOB# 1004590.033, Can Cut 3.5’’ - 6.5’’ (89 -165mm) w/ 1x 19’’ - 24’’ (610mm) Blade D * Depending on Log*, 250 Cuts/min, Max Log Length Including Trim is 138’’, Lead and Trail Shuttles Included, 460V, Control Logic 24V DC, Allen-Bradley Servo Drive, Well Maintained Purchased New, Recently Removed from Operation (Located in Candiac, QC)

(2) 1998 ITAL CONVERTING BS1801 Backstand, s/n’s 00161, 00162, Max Parent Roll Width: 102”, Max Parent Roll Diameter: 72” (Located in Waterford, NY)

1996 CONSANI 360A Back Stand, s/n 7691, Max Parent Roll Width: 102”, Max Parent Roll Diameter: 72”, Shaftless (No Hydraulic Powerpack) (Located in Waterford, NY)

1993 PERNI S/S Emboss/Laminator Embosser, s/n 6751, Type: Rubber-to-Steel, Style: Tip-to-Tip, Max Width: 108” (Currently Configured for 102"), Emboss Pattern: Spot, Laminator w/ Spare Laminator Glue Fountain Roll, Spare Laminator Glue Applicator Roll, (2) Spare Emboss Rubber Rolls (Located in Waterford, NY)

1994 SENNING 522 SE/M/U Wrapper, s/n 56970, (1) Infeed Lane, (1) Layer, Wrapping Material: Paper, Type of Packs: Can be Variable, Max Cycle Speed: 60, Nordson Hot Melt Pro Blue 10 (Located in Waterford, NY)

 

CORE MAKING EQUIPMENT

  • PCMC BRT Core Winder, s/n A5778, 4” I.D., 3” Paper Width, 350 ft/min, 58” Max Reel Diameter, 30# Paper Grade, Servo on Knife, Contrologix Electronic Platform, Upgraded for Servo Carriage
  • PCMC HHT Core Winder, s/n 7281, 4” I.D., 3” Paper Width, 350 ft/min, 58” Max Reel Diameter, 30# Paper Grade, Servo on Knife, Contrologix Electronic Platform, Upgraded for Servo Carriage
  • PCMC Core Winder, Model 8032, Including 2 Back Stands, Winder, Saw, Roll Down Table, Electrical Cabinet, Vacuum Blower for Saw House and Drum, Communication/Tool Board, Core Stock Storage Rack, Includes All Piping for this Machine (Located in Pryor, OK)
  • PCMC Core Winder, Model 8033, Including 2 Back Stands, Winder, Saw, Roll Down Table, Electrical Cabinet, Vacuum Blower for Saw House and Drum, Small Back Board for Straightening Out Cores, and Glue Tote Rack and Pump, Includes All Piping and Conduit for this Machine, Core Stock Storage Rack (Located in Pryor, OK)
  • SOUTHWORTH T490 Core Stock Skids Roll Upender
  • Core Upper Distributor
  • LARGE QTY. OF MATTHEWS 6”W Overhead Core Belt Conveyors, Approx. 360’L

 

PLANT SUPPORT EQUIPMENT

2015 FUTURA F80.A4 4-Colour Printer, s/n 183, Drive Side: (as per web flow) Left, Web Width: Max 110” (2590.8mm), Cliché Roll Diameter: Base Mandrel Diam. 12.15” (308.61mm), Total Finished Diameter (base mandrel + sleeve): 12.738” (323.54mm), Unwind Stand: 1x F70 Manual up to 1000 m/min (3280 ft/min), Parent Roll Max. Diameter: 3000mm (118”), Parent Roll Max Weight: 5000kg (11000lb) for Max Diameter 300mm (118”), Core Plugs – qty 4 – 297mm (11 11/16”), Rewinder: FOCUS “REELITE 20-ENS” Shaft Sizes: 2 x 3” + 2 x 12” 12-40 g/sq.M, Finished Reels Max Diameter 2500mm, Max Width 2700mm, Design Speed: 1300 mt/min, Operating 1100 mt/min, Slitting System CM 150A, Spool Handler: REELITE 20 ENS (NEW COST $4.3M+ USD), (Located in Barnwell, SC)

2010 FUTURA Dual Colour Printer, Machine Type F80.C2, s/n F00086/00424, 460 Amp, 60Hz, HMI Unit and Various Parts, Electrical Wires, Bolts and Bearings (Located in Wagram, NC)

FIBREFLOW FF350 Drum Repulping System, s/n 118, Pulping Section mat’l: SIS 2343, Screen Mat’l: SIS 2343, Vat Material: 316L, Hood Material: 216L, Drum Inside Diameter: 11’ 5-7/8”, Length 81’ 1-7/8”, Drum Weight Empty: 183,000lbs, (1) drive, 700HP, 1,800 RPM, Drum Speed: 13 RPM, 675 adst/day, Pulp Consist: 15-18%, Screen Consist: 4%, Vat Consist: 3.5% (NEW COST $3.75M USD) (Located in Pryor, OK)

(12) KINGSKILDE TRL 100 Trim Blowers, 10HP, 8” Inlet, 6” Outlet, 3,500 RPM

LARGE QTY. OF MATTHEWS Overhead Case/Boxes belt Conveyor, Approx. 2,600’L x 22”W, Powered/Belt/Incline/Decline

2002 AMBAFLEX Spiral Conveyor, Model SV-800-1800, s/n SV-23-398-CD, Up Orientation, Box Inlet: In – 28”, Out – 20’, 21’ Total Height, 90 Degrees (Located in Waterford, NY)

2002 AMBAFLEX Spiral Conveyor, Model SV-600-1800, s/n 2423-01, Down Orientation, Box Inlet: In – 28”, Out – 20’, 21’ Total Height, 180 Degrees (Located in Waterford, NY)

2002 AMBAFLEX Spiral Conveyor, Model SV-600-1800, s/n 2433-02, Box Inlet: In – 6’-6”, Out – 20’-6”, 21’ Total Height, 180 Degrees (Located in Wagram, NC)

2001 AMBAFLEX Spiral Conveyor, Model SV-400-1800, s/n 23.398/01, Box Inlet: In – 32”, Out – 20’-6”, 21’ Total Height, 180 Degrees (Located in Wagram, NC)

(3) NASH SC7 Vacuum Pumps complete kit with electrical motor and starter.

NES NC7 Vacuum Pump, s/n N8723-2

SULLAIR 32-25-300L-ACAC Air Compressor, 300HP, 1,750 CFM, s/n 003-82567

(3) NEBRASKA Boilers NF-F-72 (100,000 lb/h), Water Tube, s/n D3844, 46, 48, Max A.W.P. 250 PSI, Nat Gas w/ Associated Pumps, etc. (Located in Wagram, NC)

1993 NEBRASKA Boilers NS-E-66 (74,500 lb/h), Water Tube, s/n D3010, Max A.W.P. 250 PSI, 4,873 Sq. Ft., Nat Gas w/ Associated Pumps, etc. (Located in Wagram, NC)

2008 INGERSOL-RAND Air Compressor [Nirvana] Model-IRN300H-25, S/N ENO2O3UO8297 300HP (Located in Waterford, NY)

MULTITON SW 20-63 Walk Behind Forklift, s/n 1106653399 w/ Charger

BIG JOE S22-62 Walk Behind Forklift, s/n 427170693 w/ Charger

CROWN Stand Up Forklift, 24V

NISSAN 50MCU1F2A25LV Propane Forklift

POWER BOSS TSS/78-HD Floor Sweeper, LP, s/n 1770098

RIDGID 535 Pipes Threader, s/n EBE077841206

Large Qty. of Assorted Welders

Complete Machine Shop

REID No. 2-3 Surface Grinder

CLAUSING Lathe

WALLACE Electrical Hydraulic Press

BRIDGEPORT Style Milling Machine

Vertical Bandsaw

Bearing Heaters

BALEMASTER Horizontal Baler, s/n 94018 C/W Large Belt Infeed Conveyor

2010 PTR 3400-HD Baler, s/n 106457

AMERICAN BALER CORP. Baler, s/n 62442

2003 WASTE EQUIP. 6030XHD Baler, s/n 70650

TMC ML 1800 Wrapper

(3) MARKEM 700 SAP Wipe Arms

MARKEM 2200 SAP Label Applicator

(2) MARKEM 5200 Stand Case Printers

(2) MARKEM 5400 Stand Case Printers

(13) MARKEM 9232 Stand Alone Data Coders

TEXCON 9-8 Rotary Drum Dust Collector, Osprey Vacuum

EZ GO Golf Cart, s/n TXT PDS 2153188

SKYJACK 3226 Electric Scissor Lift, s/n 28144

GENIE Z-30/20N RJ Articulating Boom Lift, 500lb Platform Cap., 35’2” Max Working Height, 20’6” Max Horizontal Reach, 12’8” Max Up and Over Clearance, s/n Z30NF-19267

COPPER WIRE

ELECTRIC MOTORS & SPARE PARTS

COMPLETE STORES & BEARINGS, APPROX. $2MIL

(2) Storage Trailers

Share
Brochure
Catalogue
Ask a Question
Customer Information
Product
Position
Upload PDF
Message / Comments