MINSTER PM3-300-84 Straight Side Press (#31), s/n PM3-300-25496, SPM 120-500, Bolster 84” x 44”, Stroke 1.25”, Slide Adjust 3”, Bed Stroke Down Adjust 25.03”, Vamco Quantum Servo Feeder, HERR VOSS VMLA 24/874/17/3, 4 Hi, RH Leveller, s/n 100982-011, 012 1000 to 3600” per min, MINSTER MR6-14D Double Uncoiler, 6,000lb Cap., s/n 13-70547, Operators Terminal, Loadgard CS 400, Smartpac Wintriss Press Automation Control
MINSTER PM2-200-60 Straight Side Press (#30), s/n PM2-200-25053, 200-Ton Cap., SPM 0-600, Bolster 60” x 39”, Stroke 1.25”, Bed Stroke Down Adjust 22”, Vamco Quantum Servo Feeder, Leveller, Double Unciler, Omnilink II LCD Operators Terminal, Herion TLG 4500
MINSTER PM2-150-54 Straight Side Press (#28), s/n PM2-150-23646, 150-Ton Cap., SPM 0-800, Bolster 54” x 39”, Stroke 1.25”, Vamco Quantum 12 Servo Feeder w/ Control Panel, Leveller, Uncoiler, Omnilink II LCD Operators Terminal, 3-Ton Jib Boom w/ Lodestar Electric Hoist
MINSTER PM2-125-48 Straight Side Press (#32), s/n PM2-125-24354, 125-Ton Cap., SPM 0-650, Bolster 48” x 32”, Stroke 1/5”, Slide Adjust 2”, Bed Stroke Down Adjust 19.88”, Vamco TS 8 Feeder, s/n A8F322T67R, Leveller, Double Uncoiler w/ Motivation Jib Boom, Budgit ½-Ton Electric Hoist, Operators Terminal, Herion TLG 4500, Smartpac Wintriss Press Automation Control
MINSTER P2-100-54 Straight Side Press (#27), s/n P2-100-22060, 100-Ton Cap., SPM 0-600, Bolster 54” x 31”, Stroke 1”, Slide Adjust 2”, Bed Stroke Down Adjust 2”, Vamco Mark 8 Feeder, s/n A8F322T59R, Littell Leveller 1340” per min, Uncoiler w/ 2-Ton Jib Boom, Lodestar Electric Hoist, Loadgard CS 4800
MINSTER P2-100-54 Straight Side Press (#24), s/n P2-100-20668, 100-Ton Cap., SPM 0-600, Bolster 54” x 31”, Stroke 1”, Slide Adjust 2”, Bed Stroke Down Adjust 17”, Vamco TS6 Feeder, s/n A6F32T239R, Littell Leveller, 5,000lb Cap. Double Uncoiler, Loadgard CS 4800, Operators Terminal
MINSTER P2-60-36 Straight Side Press (#18), s/n P2-60-15788C, 60-Ton Cap., SPM 150-300, Bolster 36” x 25”, Stroke 1.5”, Slide Adjust 3”, Bed Stroke Down Adjust 15”, Vamoc TS6 Feeder, s/n A6F3221238R, Leveller 1000” per min, Uncoiler w/ 1-Ton Jib Boom, CM Chain Hoist, Operators Terminal
MINSTER P2-60-35 Straight Side Press (#17), s/n P2-60-15787C, SPM 150-300, 60-Ton Cap., Bolster 36” x 25”, Stroke 1/5”, Slide Adjust 3”, Bed Stroke Down Adjust 15”, Vamco TR8 Feeder, s/n A85322T234R, Leveller 1550” per min, Uncoiler w/ 2-Ton Jib Boom, CM Chain Hoist, Loadgard CS 2800
MINSTER P2-30-24 Straight Side Press (#23), s/n P2-30-19010C, 30-Ton Cap., SPM 375-750, Bolster 24” x 19”, Stroke 1”, Slide Adjust 2”, Bed Stroke Down Adjust 14”, Vamco Mark 6 Feeder, s/n SA6F322T322R, Littell Leveller, s/n 74572-65-1, Uncoiler w/ 2-Ton Jib Boom, Chain Hoist, Loadgard CS 4800, Operators Terminal
MINSTER P2-150 Straight Side Press (#8), s/n P2-150-18548, 150-Ton Cap., Bolster 48” x 40”, 0-250 Stroke/min, 1” Stroke, 4” Slide Adjustment, 20.5” Shut Height, Clutch Air Pressure for Rated Tonnage in Pounds 60
MINSTER P2-75 Straight Side Press, s/n P2-75-13555, 75-Ton Cap., 42” x 32” Bolster, 100/200 Strokes/min, 1” Stroke, 4” Slide Adjustment, 19” Shut Height, Clutch Air Pressure for Rated Tonnage in Pounds 55
(7+) BRUDERER MACHINERY, WOLNER, LITTELL Levellers
PRO-ECO Thin Gauge Electrical Steel Slitter and Slitting Line Operation Available as a Going Concern Standalone Business, Capable of Slitting .009” to .045” Thickness – Includes 13,500 sq. ft. of Leased Space in Separate Building – For Further Information, Contact George Boothe 647-612-9132 (NOT INCLUDED IN AUCTION):
- PRO-ECO 1008-6-48 Slitting Head, s/n 2503-2-77 w/ 10x.048 60,000 PSI
- PRO-ECO 20-36 Coil Car, 20,000lb Cap., s/n 1260-1-75
- PRO-ECO 20-40 Uncoiler, 20,000lb Cap., Snubber, s/n 1260-2-75
- PRO-ECO Peeler Table
- PRO-ECO 1008048 Slitting Head, s/n 2503-76 w/ Powered Pinch Rolls, 10-.048-60,000 PSI, 50HP
- PRO-ECO 20-40 REC Recoiler, 20,000lb Cap., Snubber, s/n 1260-9-75
- PRO-ECO 20-48 Coil Car, 20,000lb Cap., s/n 1260-11-75
- PRO-ECO L.D.-SC.W. Scrap Winder, 1,500lb Cap., s/n 1260-7-758
- Coil Turret
- PRO-ECO BT-6-60-18 Coil Packaging Line, 600lb Cap., s/n 2348-6-76 w/ Coil Carousel
- Slitter Knives, Inserts, Tooling, Heads, Rubber Spacers
YODER Slitting Line Consisting of: ARMS-FRANLIN Uncoiler, Feeder, Slitter, FARREL Winder, Recoiler, Controls, Electrical Panel, Transformer
GASMAC Roller Hearth Annealing Furnace, s/n JW910575, Natural Gas, 1,500,000 BTU/HR, 42”W x 22”H Opening, Thermco 8400HN10AN1100 Gas Mixer, Control Panels
CANADIAN GENERAL ELECTRIC Roller Hearth Furnace, s/n 23485-7 w/ (9) Zones, Approx. 60”w x 110’L, (3) Exhaust Fans, Natural Gas, 675,000 BTU, 1,000lb Jib Boom w/ CM Electric Hoist
JONES & SHIPMAN Surface Grinder, 6” x 18” Magnetic Chuck
JONES & SHIPMAN 540 Surface Grinder, 6” x 18” Magnetic Chuck
JONES & SHIPMAN 540P Surface Grinder, 6” x 18” Magnetic Chuck, s/n BO 76775
(2) CHEVALIER FSG-618M Surface Grinders, 6” x 18” Magnetic Chucks
NORTON BNR 7315 Cylindrical Grinder
SOUTHBEND Toolroom Lathe
DOMINION 17” Colchester Lathe
LEBLOND Lathe
LAGUN FTV-4L Milling Machine
MAS V0320 Radial Arm Drill
NEWALL No. 2443 Jig Boring Machine, 1,200lb Cap., s/n 61VJPM2443-19
SIP HYDROPTIC-6A Vertical Jig Boring Machine, Type ARM-67A, s/n 665
BROWN BOGGS 349C Foot Shear, 14GA Cap.
AMCO MS-410 Shear, 60” Cap.
MITUTOYO Quick Vision Apex Inspection Station, s/n 30918303
KEYENCE IM Series Inspection Station
HYSTER S120XL Propane Forklift, 12,100lb Cap., 184.5” Max Lift, 3-Stage Mast, Solid Tires, s/n D004V09918S
TOYOTA 84GCU32 Propane Forklift, 5,150lb Cap., 187” Max Lift, 3-Stage Mast, Side Shift, Solid Tires, s/n 16634
TOYOTA 8FGCU25 Propane Forklift, 4,500lb Cap., 189” Max Lift, 3-Stage Mast, Side Shift, Solid Tires, s/n 41814
TOYOTA 7FGCU25 Propane Forklift, 4,500lb Cap., 189” Max Lift, 3-Stage Mast, Side Shift, Solid Tires, s/n 92416
HELI CPYD25C-KU1H Propane Forklift, 4,520lb Cap., s/n 230252N0230
TCM Propane Forklift, 4,300lb Cap.
5-Ton Bridge Crane, Single Girder, Underslung Hoist, Pendant Control
SKYJACK SJIII 3226 Electric Scissor Lift
SNORKEL SL-20 Electric Scissor Lift, s/n 9431671194
CROWN 20WTL Electric Stacker, 2,000lb Cap., 130” Max Lift, s/n W-9222
BIG JOE PDI-24-A6 Electric Die Lifter, 2,000lb Cap., 70” Max Lift, 24V, s/n 368357
(2) GARDNER DENVER EBM99F48 Rotary Screw Air Compressors, 125HP
HYDROVANE Rotary Screw Air Compressor
ARCTICSTAR Air Dryer, s/n 340407001
GARDNER DENVER RNC750A5B Air Dryer, s/n FD750C5750506023
1,700,000lbs+ Full Size & Slit Electrical Steel Coils (SOLD ON DAY 2)
(200+) High-Speed Carbide Press Dies (SOLD ON DAY 2)
In Floor Scrap Conveyor System
Hydraulic Coil Upender, 25,000lb Cap.
8,000lb Cap. Coil Upender
Coil Lifting Hooks up to 25,000lb Cap.
FOX FPS500H Automatic Pallet Wrapper, s/n 500F-012918-059-S w/ Digital Scale
KOHLER 33RZ82 Fast Response II Standby Generator, 30KW, 38KVA, s/n 287863
BERG BWC 2-70X Water Cooled Gas Chiller, s/n W3472-0891-GSM002a
(3) DTE Horizontal Bulk Storage Tanks, 25,000L, 10,000L, 4,540L w/ Pumps & Controls
POWERSPEC Hydraulic Power Supply
MINIMAG 26D Electric Floor Scrubber
PLUS: Jib Cranes, DENISON Presses, Die Storage Racks, Workbenches, Electric & Manual Hoists, Scales, Transformers, Electrical, Copper Cable, Welders, Dump Hoppers, Rigging Chains, Press Support Equipment, Precision Instruments, Pallet Racking, Power & Hand Tools, Office Equipment and Much More!
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
- Lot Catalog Description(s)
The auction catalog serves as a guide only. While the Auctioneer believes the descriptions to be accurate, no warranties are made regarding their correctness. - Auctioneer’s Rights
The Auctioneer reserves the right to sell lots subject to reserve and may bid on its own behalf or on behalf of others, either verbally, electronically or through written proxy. All lots are subject to prior sale. - Bidder Eligibility
The Auctioneer may refuse any application to bid in the online auction and can revoke such privileges at any time. - Bidding Process
All items will be sold to the highest bidder through the established online bidding process. The Auctioneer reserves the right to sell items individually, in groups, or "In Bulk," at their discretion. In the event of a bidding dispute, the Auctioneer may re-offer the contested lot either during the ongoing online auction or afterward by privately soliciting offers from bidders who participated in the bidding for that lot. The Auctioneer's decisions regarding the conduct of the auction are final and binding. - Finality of Sale
Sales are concluded as indicated by the Auctioneer, and no purchaser may revoke their bid after the auction concludes. Title to purchased items will pass only upon full payment of the purchase price. - "As Is" Sales
ALL SALES ARE FINAL and are conducted on an "AS IS, WHERE IS," "IN PLACE," and "WITH ALL FAULTS" basis. There are no warranties or conditions, expressed or implied, regarding title, description, fitness for purpose, or condition. Descriptions are for guidance only; bidders should review items thoroughly before bidding. Purchasers rely solely on their own assessments. - Payment Terms
A deposit of $2,000 is required from all Canadian and U.S. bidders prior to approval to participate in the auction. International bidders should contact the Auctioneer for prior approval and to determine any applicable deposit requirements. The Auction invoice must paid in full within 24 hours of receiving the auction invoice. Payment is to made in cash or via electronic funds transfer. Visa and MasterCard are accepted for purchases up to $2,000 and are subject to a 3% administrative fee applied to the total auction invoice.. If a purchaser fails to pay or arrange for shipping within the specified time, the Auctioneer may resell the items, with the original purchaser liable for any shortfall, as well as all associated costs, including interest, legal fees, and storage.- Credit Card Currency and Payment Processing: All Credit Card payments to Infinity Asset Solutions Inc. are processed through the Auctioneer’s Canadian merchant banking facilities and may be settled in Canadian Dollars (CAD) regardless of the currency referenced in the auction listing, invoice, or asset location. Any currency conversion, foreign exchange charges, international transaction fees, or related costs imposed by a purchaser’s bank, credit card issuer, or payment provider are the sole responsibility of the purchaser and are not refundable.
- Removal of Purchased Items
Items cannot be removed until full payment is received in full. Purchasers are responsible for the costs and logistics of shipping or pick-up. All items must be collected or shipped within the specified timeframe, and the purchaser bears all responsibility for any damages incurred during transport. Note: Some auctions have additional terms for removal, such as exclusive riggers and/or pickup of items by appointment only. - Transfer Documents
Where applicable and available, the Auctioneer will provide transfer documents, such as motor vehicle ownership papers, to the purchaser electronically or as available. All costs associated with transfer will be the sole responsibility of the purchaser. - Assignment of Rights
Purchasers may not assign, transfer, or dispose of their rights to purchased items until the purchase price is paid in full. - Taxes
Purchasers are responsible for paying applicable taxes or providing exemption certificates at the time of payment. - Liability Disclaimer
The Auctioneer assumes no responsibility or liability once title passes to the purchaser, which occurs upon full payment. Purchasers are advised to arrange for their own insurance coverage. Title will revert to the seller if purchases are not shipped or collected by the specified deadline. - Inability to Deliver and Cancellation of Lots
The Auctioneer and/or the Auctioneer’s client reserves the right to cancel the sale of any lot for any reason, including but not limited to inability to deliver due to fire, theft, or other unforeseen circumstances. In such cases of cancellation, the Auctioneer will refund any amounts paid for the canceled lot but shall have no further liability to the purchaser. Should the purchaser or any potential purchaser choose to legally challenge the Auctioneer's decision, the purchaser agrees to be responsible for all legal fees and expenses incurred by the Auctioneer in defending against such claims. - Assumption of Risk
Participants acknowledge that online auctions involve certain risks, including potential technical issues. By participating, individuals and/or companies assume all risks associated with the auction process, and neither the Auctioneer nor its agents or employees will be liable for any technical difficulties, injuries, or damages that may occur.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
- All invoices must be paid in full prior to removal of equipment/ Each invoice must be marked “Paid in Full” and initialed by an authorized Infinity representative.
- All buyers are solely responsible for coordinating the removal of items purchased at the Auction and all associated costs.
- Buyers are responsible for, at their expense:
- Proper and safe disconnection and termination of all electrical, gas, water and/or air lines to machines conforming to all governing building codes;
- Shearing flush to the floor of all anchor bolts or fasteners;
- Erecting safety barriers around pits and holes in the floor created by removal of equipment until repaired;
- Repair all holes in the floor, walls or roof created by the removal of items purchased conforming to all governing building codes;
- Removing, off premises, machine oils and all hazardous materials (including all contaminants) contained in items purchased;
- Repairing all damage caused to the premises by a buyer, its representative or any other party hired by a buyer for the removal of items purchased;
- Leaving the work area in a clean, broom-swept condition conforming to all governing building codes;
- Any other specific terms and conditions communicated by Infinity before, during or after the auction sale;
- Removal of items purchased by the time and date set by Infinity before, during or after the auction sale; and
- The safety of all of a buyer’s employees, agents or representatives including all movers/riggers hired by such buyer.
- Prior to removal, all buyers, or any movers or riggers hired by a buyer, must provide to Infinity a satisfactory certificate of insurance evidencing at least $5,000,000 in comprehensive liability insurance coverage (including workers compensation and automobile) per person, per occurrence.
- Prior to removal, an authorized Infinity representative must examine and approve the removal of all items purchased at the sale. Such approval shall be indicated by this representative initialing all invoices.
- No items shall be removed until after the auction sale. Removal hours are weekdays only between 8:00 a.m. and 4:00 p.m. unless otherwise specified.
- Buyers and their movers/riggers are jointly and severally liable for all damages, costs and expenses to the premises or any other assets which were cased by any of them, their employees, agents or representatives whether through negligence or otherwise. The Buyer indemnifies and saves Infinity harmless from any and all costs, expenses and claims suffered or incurred by Infinity as a result of any act or omission of such buyer and/or any mover or rigger retained by a buyer.
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.