Auctions
HORIZONTAL SINGLE BELT CASTER
HAZELETT MODEL: 29.88 HORIZONTAL SINGLE BELT CASTING SYSTEM SINGLE CARRIAGE PILOT CASTER, FOR STEEL, ALUMINUM, COPPER ALLOYS, STRIPS THICKNESS RANGE: 0.55MM TO 10MM, MAXIMUM WIDTH: 250MM, CASTING SPEED: MAX 1.4M/SEC, BELT WIDTH: 368MM, BELT THICKNESS: 1.12MM TO 1.27MM, BELT LENGTH: 7,360 MM, CASTER DRIVE MOTOR POWER: 15KW, CASTER COOLING WATER PRESSURE: MAX 120 PSI. NOTE- LOCATED IN OHIO U.S.A. PAID $975,000
ROLLING MILL
HAZELETT PINCH ROLL-MINI MILL (REDUCTION 20% STEEL PLATES), ROLL DIA: 12", ROLL FACE WIDTH: 15", MAX. ROLL OPENING: 6" APPROX. MAX. STRIP WIDTH: 8", MAX. ROLL FORCE: 20,000 LBS, TOP PINCH ROLL ACTUATION CYLINDER OPERATION PRESSURE: 1100 PSI MAX, PINCH PLATE DRIVE CONFIGURATION: BOTTOM ROLL DRIVE. PAID $265,900
FURNACES
INDUCTOTHERM 150-30R, 150KW/460V/3200HZ VIP, POWER-TRAK 150 VARIABLE INDUCTION POWER FURNACE, 175 KVA, 3 PHASE, OUTPUT: 150 KVA, 605 VOLTS, 1333 AMPS, WATER REQUIREMENT: FLOWRATE - 19 GPM, PRESSURE - 40 PSI, MAX INLET TEMP - 90 DEGREES FAHRENHEIT, MINIMUM INLET TEMP - 75 DEGREES FAHRENHEIT, MAXIMUM CONDUCTIVITY - 800 MICOR-MHOS, MAXIMUM DISSOLVED & UNDISSOLVED SOLIDS - PPM. DIMENSIONS: H=181 CMS, W=282 CMS, T= 77 CMS, S/N: 37K-82908-246-11. PAID $116,000
INDUCTOTHERM DURA-LINE 500 INDUCTION MELTING FURNACE, CAPACITY: 330-440 Lbs, CRUCIBLE DIMENSIONS (CM): INS. DIAM -33, OUT. DIAM - 37, HEIGHT -61, FURNACE SHELL (CM): HEIGHT - 98, WIDTH - 83, THICK - 15. STANDARD FEATURES CAST ALUMINUM FURNACE BODY W/STEEL REINFORCEMENT HOIST TILTING, "FREE BREATHING" COIL DESIGN (USES HEAVY SECTION COPPER TUBE FOR MAX. EFFICIENCY), HYDAULIC TILTING, PUSH-OUT LINING SYSTEM, FUME HOOD, POWER HOSES, DOUBLE TRUNNION (HOIST & HYDRAULIC TILT), 250 KG OF STEEL MELTING CAPACITY, S/N 01L14804233511. PAID $49,000
INDUCTOTHERM INDUCTION FURNACE, CAPACITY: 100-200 LBS, CRUCIBLE DIMENSIONS (CM) INS. DIAM. - 26, OUT. DIAM. - 28, HEIGHT - 48, FURNACE SHELL (CM): HEIGHT - 53, WIDTH - 54, LENGTH - 49. TWO DIRECT-POURING STYLES: TWO-MAN SHANK & TRUNNION TILT, DIRECT LEAD CONNECTION, COOLING WATER HOSE: 4 CM EXTERNAL DIAM., NUMBER OF COILS (ROUNDS): 12, CRITICAL COMPONENTS: REMOVAL FRONT & BACK INSPECTION, POWER CLAMP TABLE, LIFTING & TILTING SHANKS, CAST CERAMIC TOPS & BOTTOMS, 50 KG OF STEEL MELTING CAPACITY. PAID $35,000
INDUCTOTHERM MINI-MELTING INDUCTION FURNACE, CAPACITY: 2.5-25 LBS, CRUCIBLE DIMENSIONS (CM) INS. DIAM. - 18, OUT. DIAM. - 19, HEIGHT - 26, FURNACE SHELL (CM): HEIGHT - 41, WIDTH - 36, LENGTH - 36.5. TWO DIRECT-POURING STYLES: TWO-MAN SHANK & TRUNNION TILT, DIRECT LEAD CONNECTION, COOLING WATER HOSE: 2 CM EXTERNAL DIAM., NUMBER OF COILS (ROUNDS): 16, CRITICAL COMPONENTS: REMOVAL FRONT & BACK INSPECTION, POWER CLAMP TABLE, LIFTING & TILTING SHANKS, CAST CERAMIC TOPS & BOTTOMS, 25 KG OF STEEL MELTING CAPACITY. PAID $22,000
DELTEC VACUUM INDUCTION FURNACE CHAMBER (STAINLESS STEEL LINED), WITH INTERNAL CRUCIBLE, INDUCTIVELY HEATED FOR MELTING 300LBS. OF STEEL, CHAMBER W x H x D (CM) = 210 x 248 x 330, FURNACE W x H x D (CM) = 50 x 56 x 50, HYDRAULIC SYSTEM. PAID $90,000
SENTRO TECH STT-1700C, HIGH TEMPERATURE TUBE FURNACE UP TO 1700 DEGREE CELCIUS CAPACITY, 3" & 4" INCH O.D., 24" LENGTH OF HEATED ZONE, HAS HEATING ELEMENTS (MosI2), PID PROGRAMMABLE TEMPERATURE CONTROLLER, CHAMBER (CM): 43W x 71H x 58D. PAID $12,000
"HOIST SYSTEM plus motor, Dual Flow Control Valve, and including Steel Frame: Lalonde Electric Motor, BUDGIT H.P. ½, 1/2 TON, RPM 1710, V 115; Hz 60, Dynex Rivet Dual Flow Control Valve Max 3000 psi: PAID $9,000
VACUUM INDUCTION FURNACE (2015), CHAMBER (CM): 134W x 104H x 138D WITH VACUUM PUMPS AND CRUCIBLE. PAID $15,000
LAB EQUIPMENT
LINDBERG /BLUE MAX. 1700 DEGREE CELCIUS, ELECTRIC FURNACE (2012), MODEL: BF51634PCI, CHAMBER (CM): 28W x 23H x 27D, EXTERIOR: 71W x 79H X 61D, SHIPPING (CM): 94W x 114H x 94D, 5900 WATTS, VOLTS (50/60HZ): 208/240, HEAT RATE TO 1700 DEGREE CELCIUS: 95 MIN, COOL RATE 1700 TO 500 DEGREE CELCIUS: 125 MIN, WEIGHT (KG): 125 PAID $18,000
SMT 700/NOPS HYSTERESIS GRAPH FOR ANALYSES OF SOFT MAGNETIC MATERIALS, THE SYSTEM INCLUDES A DATA ACQUISITION HARDWARE & CONTROL/SOFTWARE COMPONENT OF A COMPUTER-AUTOMATED SYSTEM, FOR TESTING THE D-C AND A-C, B VS H MAGNETIC HYSTERESIS PROPERTIES & CORE LOSSES OF SOFT MAGNETIC MATERIALS (WITH SATURATION INDUCTION 0.05 TEESLA (500 GAUSS), AND UP, AND COERCIVITIES BELOW 2KA/M (25 OERSTED) W/ ATYPICAL RESOLUTION OF ABOUT 4 A/M (0.05 OE). THE DC PORTION OF THE SYSTEM MEASURES INITIAL MAGNETIZATION CURVES, REMANENCE, COERCIVE FIELD STRENGTH (COERCIVE FORCE), PEERMEABILITY & FULL FOUR-QUADRANT HYSTERESIS LOOPS. iT PROVIDES VALUES FOR REMANENCE BR, COERCIVE FIELD HC, & MAXIMUM PERMEABILITY MAX. THE AC PORTION OF THE SYSTEM ALSO MEASURES TEH AC INITIAL MAGNETIZATION CURVE VS. FREQUENCY, BH CURVE AT FREQUENCY, PERMEABILITY VS. FLUX DENSITY & FREQUENCY, & POWER LOSS VS. FLUX DENSITY & FREQUENCY FROM 20 HZ TO 30KH. TECHNICAL SPECS: SMT - 700 SHUNT RESISTOR 0.5 OHM, FREQUENCY RANGE OF APPROX. 0.005 HZ TO 1 HZ, BIPOLAR POWER AMPLIFIER W/WIDE BAND FREQUENCY RESPONSE, TYPICAL PEAK OUTPUT IS 70 VOLTS AT 9 AMPERES, MODEL NO: RIEDON OR5D FHR 4-8065, FLUXOMETER, MODEL 2130 MAGNETIC INSTRUMENTATION, BOTH THE FLUXMETER & GAUSSMETER UTILIZES 16 BIT A/D CONVERTERS, CABINET (CM): 54W x 83H x 62D, SAMPLE HOLDER = 12W x 19H x 2D. PAID 35,750
MACHINE SHOP EQUIPMENT
2009 RK MACHINERY HYDRAULIC H-FRAME SHOP PRESS WITH 100 TON CAP., WITH PRESSURE REGULATOR & FLOW CONTROL, BASE PLATE: 12.5" x 12.5", SPEED: 60 IPM, APPROACH: 20 IPM PRESSING, HYDRAULIC POWER LIFT, 575V, 3 PHASE, 10 HP MOTOR, 1760 RPM, PUMP: 1.29 - 0.40 L/S FOR 3/4 SHAFT, DIMENSIONS (CM): 173W x 256H x 84D. PAID $18,850
ALC ABRASIVE SAND BLASTER CABINET, MAXIMUM OPERATING PRESSURE: 110 PSI, AIR CONSUMPTION: 15 CFM AT 80 PSI, 115V, 50-60 HZ, CABINET (CM): 90W x 60D, TOTAL DIMENSION (CM): 91W x 156H x 81D
CLARK 15 TTF ELECTRIC WALK BEHIND TILTING FORK STACKER WITH 2450 LBS. LIFTING CAPACITY S/N: TTF 25EC175 PAID $5,250
2015 KING 7" X 12" METAL CUTTING BANDSAW
BEMAG Power Transformer; 30KVA, 3 Phases, 60Hz. PAID $1,200
(4) HYTROL 199-CRR MOTORIZED POWER CONVEYORS, TRANSFORMERS
Also: Welders, File cabinets, office furniture, RAW MATERIAL (Aluminum Ingots) and more.
For more details, click on the Bidspotter button above for complete lot photos and informations.
Pre-approved Machinery Movers
Landry Machinery Movers
Michel Landry
514-712-4160
Summerside Transport
Steven Summerside
Cell: 514-865-9350
Office: 514-355-6000
Fax: 514-355-2676
steven@summersidetransport.com
1425 Rue Graham Bell
Boucherville, QC
J4B 6A1
Ex Trans Cargo Inc.
Martin Beaulieu
President
2105, Onésime-Gagnon,
Lachine, Québec. H8T 3M7
Tel.: 1.450.565.5644 / 1.800.340.5644
Fax: 1.450.553.3555 Cell.: 1.514.895.5644
