Subscribe
Call Us: 905-669-8893


Blog

Hunting Energy Services: Auction Lot

January 19, 2021

Infinity Asset Solutions will be conducting a 2-Day auction of Hunting Energy Services (Canada) Ltd. - Due to the Realignment of their Canadian Operations. This auction features a late model, well maintained 150,000 Sq. Ft. CNC Machining Facility including:

CNC Horizontal Multi-Turning Centers (INSTALLED NEW OCTOBER 2019)

2014 MAZAK CNC Quick Turn QTZ 250MY-2T Multi-Turn Dual Spindle/Dual Turret CNC Lathes, Mazatrol Matrix 2 CNC Control, 292 Run Time Hours, 3.58” Bore, 26.50” Swing, 19.85” Bed, Kitagawa 12” Chuck, Y- Axis Off Center Machining, Live Tooling, 12 Position Turrets, Tool Pre-setter, Travels: X-9”, Y-4”, Z-22.76”, W-21.76”, 2x 35HP, 4,000 RPM, s/n 249432 COST OVER $450K

 

CNC Threading Lathes

(2) 2003 OKUMA LOC 650 2SC 1750 SIMULTURN CNC Turning Center Lathes, 14.75” Bore, OSP E100L CNC Control, Dual Turret, 22” swing, 68” Bed, 32” Chuck and back chuck, 50HP, s/n’s 102935, 103846

 

CNC Vertical Turning Centers

(2) 2013 EMAG VSC 400 Multi Spindle Vertical CNC Turning Centre DUO Cell, Fanuc 31 i CNC Controller, 8 Station ATC, BT50 Taper, 15.75” Chuck Size, Swing 16.5”, 11” Bed, Travels: X-33.5”, Z-12.5”, Chip Conveyor, 95HP, 6,000 RPM, s/n’s 104420 & 104421 c/w DGS Fluid Filtration Capture System, System Conveyor Transfer System

(2) 2006 OKUMA 2SP V60 Twin Spindle CNC Vertical Turning Centers, Fanuc 18i T CNC Control, 12-Station Turret, 27.5” Swing, 24” Chuck, Travels: X-14.7”, Z-25.98”, 40HP, 2,000 RPM, s/n’s 6031, 6035

2006 OKUMA LVT-300 CNC Vertical Turning Center, Okuma Osp-P100L CNC Controller, 12 Station VDI Turret, 11.02” Swing, 7.78” Length (Height), 8” SMW Hydraulic Chuck, Travels: X-33.27”, Z-12.2”, 30HP, 4,000 RPM, s/n, 130001

2005 OKUMA LVT-300 CNC Vertical Turning Center, Okuma Osp-P100L CNC Controller, 12 Station VDI Turret, 11.02” Swing, 7.78” Length (Height), 8” SMW Hydraulic Chuck, Travels: X-33.27”, Z-12.2”, 30HP, 4,000 RPM, s/n, 119797

Fully Integrated ARBOR Orbitform 45 Pallet Automation System, Inspection Station & Parts Flipper Arm

 

CNC Horizontal Turning Centers

2018 HAAS ST-45L CNC Horizontal Turning Center, 7.1” Bore, HAAS CNC Control, 12-Station bolt on Turret, 80” Bed, 34.5” Swing, 80” Max Turning Length, SMW Autoblok Big Bore 18” Air Chuck, 40HP, 1,400 RPM, extended tool pocket, belt type chip conveyor, Programmable servo tailstock, remote jog handle, Rigid Tapping, steady rest provision, s/n 3110182 COST OVER 375K

2016 HYUNDAI WIA L700LMA CNC Horizontal Turning Center, 7.1” Bore, Fanuc F32i CNC Control, Programmable Steady Rest, 12-Station Tool Holder w/ Live Tooling, Tail Stock, Tool Pre-setter, 36” Swing, 98” Max Turning Length, 22” Chuck, 40HP, 3,000 RPM, s/n G3230-0050 (401 RUN HOURS, INSTALLED NEW 2016)

2013 MORI SEIKI SL-403C/800 CNC Horizontal Turning Center, 7.1” Bore, MAPPS IV F32i CNC Control, 12-Station Turret, 28” Swing, 34” Max Turning Length, 18” Air Chuck and back chuck, 40HP, 1,500 RPM, tailstock, s/n SL400131002

2011 HAAS SL-40 CNC Horizontal Turning Center, 7.1” Bore, HAAS CNC Control, 10-Station Turret, 40” Swing, 44” Max Turning Length, Schunk Big Bore 16” Air Chuck, 55HP, 1,400 RPM, Big Bore option, Rear mounted A2-11 spindle nose, bolt on turret chip conveyor, rigid tapping, Intuitive programming, s/n 3087854, 2,300 Run Hours

2005 HAAS SL-40LB CNC Horizontal Turning Center, 7.1” Bore, HAAS CNC Control, 10-Station Turret, 72” Bed, 25.5 ” Swing, 72” Max Turning Length, SMW Big Bore 18” Chuck and back chuck, 55HP, 1,400 RPM, chip conveyor, extra performance option with big bore, tool pre-setter, steady rest provision, s/n 69906

2005 HAAS SL-40L CNC Horizontal Turning Center, 3.75” Bore, HAAS CNC Control, 10-Station Turret, 72” Bed, 25.5” Swing, 72” Max Turning Length, 18” Chuck, Tail Stock, Tool Pre-setter, 55HP, 1,400 RPM, s/n 69719

2005 HAAS SL-40TB CNC Horizontal Turning Center, 7.1” Bore, HAAS CNC Control, 10-Station Turret, 72” Bed, 25.5” Swing, 44” Max Turning Length, SMW Big Bore 18” Chuck and Back Chuck, Tail Stock, Tool Pre-setter, 55HP, 1,400 RPM, s/n 69978

2007 MAZAK CT4500M HD CNC Horizontal Turning Center, 10.8” Bore, Mazatrol Fusion 640MT Pro CNC Control, 12-Station Turret w/ Live Tooling & C axis, Programmable Steady Rest, SCHUNK 24” 4-Jaw Air Chuck, 33.8” Swing, 82” Bed, 31.8” Max Turning Length, 50HP, 3,000 RPM C/W Large Bore Bar Stacker 60mm, 90mm, 1meter lengths, s/n 203977, 5,297 Run Hours

2007 OKUMA Captain L370 CNC Horizontal Turning Centre, 10” Kitagawa BL210 Hydraulic Chuck, 2” Bore, OSP-P200L CNC Control, 12 Station Turret, 21.65″ Swing Over Bed, 20.47″ Maximum Turning Length, 20HP, 4500 RPM, Hydraulic Tailstock with Power Quill, Chip Pan and Chip Conveyor, s/n 3722070324-P517440

2007 OKUMA Simulturn LU300 -2SC600 Horizontal CNC Turning Centre, 2.44” Bore, Okuma OSP-P200L CNC control, Schunk Rota THW 260-81 10” Hydraulic chuck - 3” bore, 12-station Upper Turret, 8-Station Lower Turret, 23.6” Bed, 20.87” Swing Turning Length, 20/30 HP, 5,000 RPM, s/n 130688

2005 OKUMA LT-300M TWIN STAR CNC Horizontal Turning Center, Okuma OSP - 100 CNC Controller, 2X 12-Station Turret, 22” Swing, 26” Max Turning Length, 10” Chucks, 40HP, 380 – 5,000 RPM, s/n 116291, 3,185 Run Hours

2002 JOHNFORD TC-35H CNC Lathe, 5.5” Bore, Fanuc O-T CNC Control, 22” Swing, 13” Max Turning Diameter, 31” Max Turning Length, SMW Autoblok 18” 3-Jaw Hydraulic Chuck, 12-Station Turret, 20HP, 3,500 RPM, s/n AC1447

1999 DAINICHI F50 CNC lathe, 7.1” Bore, Fanuc 18i T CNC Control, 28” Swing, 80” Between Centers, SMW Big Bore 24” 3-Jaw Chuck, 50HP, Manual Steady rest, s/n E98Z02256

1998 MAZAK Slant Turn 50N CNC Horizontal Turning Center, 7.1” Bore, Mazatrol CNC Control, 28” Swing, 74” Between Centers, SMW  21” Chuck, 40 HP, tailstock, chip conveyor, s/n 134808

 

Automation Robots

(2) 2013 FANUC R-2000iB/165F 6-Axis Robot, Fanuc R30iB Control, 165KG Payload, 104” Reach, s/n’s E13644300, E13644302

 

Oilfield Bucking Breakout Units

NOV HYDRAULIC PECK-O-MATIC 821 Bucking Breakout Unit w/ Torque Monitoring & Reversable Jaws, 2-3/8” to 16” Cap., 4,000 to 75,000 ft-lb Torque, Full Set of Jaw Packs, s/n A346147-1 w/ Roller Feed Table & Loading Area

Hydraulic Buck-On Breakout Unit w/ Torque Monitoring & Reversable Jaws, 2-3/8” to 16” Cap., Full Set of Jaw Packs w/ Roller Feed Table & Loading Area

MREI 250-Ton Cap. Casing Swage Press, 3.5” to 13.5” Cap., Full Set of Jaw Pack & Clamping Dies w/ Roller Feed Table & Loading Area

 

Horizontal & Cold-Cut Saws

2013 NISHIJIMAX CNC Cutoff Saw, 6” Cap. Cut Diameter, 18” Blade, Auto Loading & Bar Stocker, Chip Conveyor, Lube System, Pattern Cutting Software, 21HP, s/n 12079

2007 HYD-MECH H-20A Automatic Horizontal Bandsaw, 20” X 20” Capacity, 20” Rounds, Auto Feed & Clamping, PLC control, Roller Feed Conveyor, s/n 80799675

 

CNC Coordinate Measuring

2013 ZEISS CONTURA G2 CMM, Travels: X-1000mm, Y-1600mm, Z-600mm, Renishaw Probe, Granite Table, s/n 201310504042

 

Precision Tooling & Measuring (TO BE SOLD DAY 1 & DAY 2)

LARGE QTY. of Thread Gauges, High Precision Standard & Custom

COMPLETE QUALITY CONTROL DEPARTMENT Including Granite Surface Plates, Block & Pin Gauge Sets, Inside/Outside Micrometers, Inspection Machines, Height Gauges, etc.

QTY. LISTA 13-Drawer Tool Storage Cabinets

 

PAINT BOOTH

20’ x 20’ Paint Booth w/ Pre-Heat Tunnel, Dry Oven, Multi-Spray Head Applicators, Built in Automated Stencil Machine, Conveyor Loading, etc.

 

PHOSPHATE LINE

AUTOMATED ZINC & MANGANESE PHOSPHATE LINE, (8) Tank Cap. w/ (5) CONAIR HTR Thermolators

(2) CONAIR Portable End Finish Phosphate Lines, CONAIR HTR Thermolators

 

ENGRAVING MARKING SYSTEMS

(5) 2017-2013 SIC E10-C153 ZA Dot Peen Bench Top Marking Systems

(2) COUTH E1-153ZA Handheld Dot Peen Marking Systems

 

Rolling Stock & Forklifts (TO BE SOLD DAY 2)

(2) TOYOTA 8FGCU25 Propane Forklifts, 4,500lb Cap., 189” Max Lift, 3-Stage Mast, Side Shift, s/n’s 16132, 16134

CLARK GPX25 Propane Forklift, 4,000lb Cap., 188” Max Lift, s/n 230-0174-8890KCF

NINGBO C1015M Electric Stacker, 1,500lb Cap., s/n 11018
machinery auctions 
machinery auctions  machinery auctions  
 


JIB & OVERHEAD CRANES (TO BE SOLD DAY 2)

KAVERIT 6.3-Ton Overhead Crane, 32’ Span w/ Remote, P&H Overhead Crane w/ KITO 1 Ton Electric Crane Hoist, Approx. 32’ Span, 205’ Runway

(2) DEARBORN 2-Ton Overhead Bridge Cranes w/ R&M SPACEMASTER SX 2-Ton Hoist Crane w/ Remote, Approx. 32’ Span x 115’ Runway

CRS CRANE SYSTEM Overhead Bridge Crane, 5-Ton Cap. w/ SPACEMASTER 5-Ton Hoist, Remote, Approx. 25’ Span

 

STRESS RELIVIEVING

iROSS INDUCTOHEAT Fluxmanager Pipe End Stress Relieving System w/ (3) iROSS Line Frequency Coil Packs, 4-1/2” to 13-5/8” Cap., Infrared & Thermal Imaging

 

SUPPORT & MAINTENANCE (TO BE SOLD DAY 1 & DAY 2)

(12) Steel Dump Hoppers

(2) DONALDSON TORRIT DB2000 Downdraft Tables

MOD-U-BLAST Sand Blast Booth w/ Dust Collectors

LARGE ASSORTMENT OF PERISHABLE TOOLING – Carbide & HSS Drill Bits, End Mills, Reamers, Taps & Dies, Boring Bars, Inserts, Usable Raw Material Inventory & Much More!

QUANITY of Precision CAT 40 & BT 40/50 Tool Holders

SAMSCO CORP. Water Evaporator Recycle System, Gas Fired

EASY-KLEEN EZ04035G-K-GP-12 Pressure Washer System, 14HP KOHLER Gas Motor, s/n 1713400

PLUS - General Fabrication & Machining Support Equipment, Lathes, Mills, Pipe Storage Racks & MORE!



Ask a Question
Customer Information
Product
Position
Upload PDF
Message / Comments